100mm x 3m Brush Strip Seal
This SBMDirect Brush Strip Seal is just the thing you need to close that troublesome gap where the draught gets in, but a rigid, permanent fill is not an option.
It can be fitted to the top, side or bottom (or a mixture of all three) sides of nearly every door, gate, and window (and anywhere else that’s got a gap or hole that needs filling) to seal those annoying gaps where the wind and rain get through.
The SBMDirect Brush Strip Seal is designed to be fixed onto either the door/ window, etc. itself or the frame.
You have three options of carrier angle: 180 degrees, 90 degrees and 45 degrees to ensure the best angle possible.
Filaments
The brush filaments are made from Type 6 nylon which is hard wearing, works in a temperature range of between -40°c through to more than 100°c.
The filaments also have excellent memory meaning they will not go out of shape - unlike cheaper products that are on the market.
If your brush wears out, gets damaged or you require a longer brush length then you can buy a replacement - see our range of Camstrips to find the replacement brush you need.
The brushes are simple to replace. All you have to do is tap out the old brush and slide in the new one.
Carriers
The brush is held in an aluminium carrier. It is easy to cut with a fine-toothed saw (such as a hacksaw) to get the perfect fit.
Three options for the angle of the carrier are available: 180°, 90°, and 45°.These are shown in our picture gallery to give you a good idea that you are ordering the correct angle for your needs.
Your Brush Strip Seal will come with full fitting instructions to help you get that perfect fit.
